Do you own a printer and a PC? Are you wondering how to fix a Service error 5100 Canon MP160? This blog is for you! It also guides you on the canon printer error codes.
What are the steps to fix the issue?
● Correctly load the paper.
● Align the sides of the sheets before loading
when loading two or more sheets.
● Make sure not to exceed the paper load limit
when loading the paper stack.
● However, proper paper feeding might not be
possible at this maximum capacity.
● In cold or humid weather conditions, reduce
the sheets of paper you load at a time to but half the paper load limit.
● Always load the paper in portrait orientation,
no matter the printing orientation.
● Keep the face of your printer facing upwards
while loading the paper.
● Align the paper stack.
● Slide the paper guide to touch the left fringe
of the pile.
● Check to ascertain if the paper you're printing
on isn't too thick or curled.
● If you are printing on an envelope, load them
in portrait orientation. The envelopes will not feed properly when placed in
landscape orientation.
● The media type and settings must correspond
with the paper size settings concerning the loaded paper.
● If there are any foreign objects within the
rear tray, make sure to show off the machine, unplug it from the facility
supply, then remove the foreign object.
● Clean the paper feed roller.
Find out the ways to resolve Canon MP460 error code 5100, just by applying few important instructions.
Always do the following at jam-time:
● Follow the sequential removal/clearing
tutorial.
● Use both hands to Grab any piece of paper to
be removed.
● Pull evenly with both hands, steady pressure.
If the paper begins to tear Stop, attempt to re-grip closer to the nip (where
the two rollers meet) of the rollers, and check out again.
● Always plan to remove paper within the same
direction it had been traveling. It will not always be possible to try to do
this. At those times, attempt to observe anything the paper is touching as you
remove it-it is comparatively easy to get sufficient force to knock a sensor
flag out of position.
FAQs
- Why is my printer not grabbing the paper?
The most probable reasons are -
● The paper is not being properly engaged with
the feed rollers.
● The paper-width guide is too tightly pressed
against the paper stack.
● The paper tray isn't wholly inserted into the
merchandise. The paper settings within the print driver don't match the paper
loaded within the paper tray.
- How do I buy my Canon printer to prevent feeding paper?
● Ensure that the printer is on; remove any
paper from the Rear Tray.
● Open the printer properties dialog box.
● Click the upkeep tab, then roller cleaning.
● Confirm the displayed message and click OK.
● Make sure that the device Roller stops
rotating.
● Confirm the displayed message and click OK.
Start implementing the above-listed steps one
by one on connecting a network printer to a mac. You can also scroll through
the blog if you are looking for a wireless printer for the apple mac. Fix canon
Pixma mg2520 paper not feeding right now by going through the steps.